546 applications collected
T1 Willow - Removal of overextended branch
Cut back Beech and Horse Chesnut tree by 2 metres
T1 Mountain Beech - Fell, as the tree is dead
Common Yew - lift crown by 10ft
Common Yew - requires whole crown lift by up to 10 feet
Common Yew - up to 3m from floor crown lift
Reduce T1 Horse Chestnut 1.5m laterally
T1 Ash - reduce in height by 4-5m (decay), T2 Oak - reduce lateral spread close to previous pruning points approx 2m (maintenance)
T1 Common Holly - Up to 10ft Crown lift from ground level
Willow - re-pollard to approx. 10m
G1 2x Damson - remove 2x leaning branches over patio, reduce remaining trees by 3m and prune to clear house by 50-60cm
Reduce T1 Sycamore height by 2m and width by 1.5m
T1 Robinia in centre of garden - Remove to ground level.
T1 - Sycamore: reduce height by 2m and width by 1.5m. Reason: To maintain the tree at a suitable size for the location
Group of 3x Alder - remove close to ground level and treat stumps with ecoplugs to inhibit regrowth
Walnut Tree - thin crown and trim tree by 20%.
Fell dead Scots Pine
- Remove T11, Common Beech deadwood - Remove all T12 Common Ash deadwood of 40mm diameter or greater throughout crown and reduce height by 3m - Remove T14 Common Lime basal /…
Clear a fallen Ash tree
Demolition of the existing rear lean-to/plant room and construction of a single-storey rear infill extension with a flat roof and roof lantern, together with associated internal…
T1 - Lilac (Syringa vulgaris) and Mock Orange (Philadelphus spp.) by the front door - reduce the group to approximately 2m in height, pruning to suitable growth points to create a…
T1, Common lime, Remove basal/trunk epicormic shoots T2, Common lime, Remove basal/trunk epicormic shoots T8, English oak, Raise crown by 2m. Reduce lowest substantial limbs by…
Discharge of condition 13 (Biodiversity Net Gain) of 24/01761/FUL
Yew Tree - To reduce height by 6ft and then bring in sides to maintain shape