193 on record · mostly Bristol · 21 approved in the last 90 days · typically 26 days to a decision
Build a small detached garden office behind the existing garden flat.
Cut back one maple tree by up to 3.5 metres and shorten another maple's overhanging branches by two metres.
Shorten sycamore branches towards the church, remove dead branches and remove lower branches to provide five metres of clearance.
Prune two silver birches and a laburnum to reduce their spread and clear a light column, garden and pavement.
Installing a dropped kerb and vehicle crossing to provide access from the road.
Reduce a magnolia's height and side branches by approximately two metres.
Prune a beech tree, reducing its height and spread by 2.5–3 metres to previous pruning points.
Fell a dead Lawson cypress tree.
An ash tree and cherry laurel will be trimmed away from a building, wall and parking area.
Make internal changes to the ground floor.
Fell a dead apple tree and an Elaeagnus shrub.
Renovate the property, make minor changes to internal dividing walls and install two roof windows.
Replace the rear garage and extension with a single-storey side and rear extension; alter interiors, rooflights, decking, front garden and driveway.
Remove a magnolia tree and prune back a fig tree to between 1.5 and two metres.
Build a single-storey rear extension projecting six metres from the house.
Fell one dying Japanese cherry tree.
Build a new home and alter the existing house with lean-to demolition, replacement roofing, a rear dormer, rooflights and new rear windows.
Build a new home and alter the existing house with lean-to demolition, replacement roofing, a rear dormer, rooflights and new rear windows.
Remove part of a hedge to provide seven metres of clearance in front of the property, and fell a cypress and sycamore.
Wildlife protection details accompany a new house and alterations to an existing house, including roof replacement, a dormer and lean-to demolition.
REMOVAL OF EXISTING 15M HIGH PHASE 8 POLE SUPPORTING H3G EQUIPMENT AND REPLACEMENT WITH A 20M HIGH PHASE 7.3 POLE SUPPORTING H3G & VMO2 EQUIPMENT WITH A WRAPAROUND CABINET AT ITS…
Cut back a copper beech's crown by three to four metres to its previous pruning points.
Reduce the height and spread of a silver birch by up to one metre.
Demolish existing garages and build two homes with associated site works.