1no. Oak (T1) - Crown lift to approx. 5.5m by removing epicormic growth from main stem. Reduce 5–6 large upper limbs by up to 4m, with…
11 BROOK CLOSE, CHANDLER'S FORD, EASTLEIGH, SO53 3BT
Official description
1no. Oak (T1) - Crown lift to approx. 5.5m by removing epicormic growth from main stem. Reduce 5–6 large upper limbs by up to 4m, with pruning cuts made appropriately to suitable growth points. To improve clearance around property and driveways, while allowing improved light where new solar panels are being installed. 1no. Oak (T2) - Reduce lateral growth extending over shared driveway by up to 2m, with pruning restricted to the lateral growth overhanging driveway. To reduce amount of debris and bird fouling affecting vehicles parked beneath tree, provide appropriate clearance of driveways and improve amenity of property, while retaining trees and their overall form.
- Council
- Eastleigh
- Reference
- T/26/102125
- Application type
- Consent Under Tree Preservation Orders
- Status
- Application Valid - Awaiting Decision
- Submitted
- 25 Sep 2026
- Postcode
- SO53 3BT
More applications in Eastleigh
1 No. Beech Tree (T1) - Dismantle to ground level. It hasn't come into leaf this year, the Bark around the basal area is pealing on the lower basal area of the stem and there is…
1 No. Unspecified Multi-stemmed Evergreen (T1) - Complete removal. 1 No. Mature Eucalyptus (T2) - Removal of the rotting dead central trunk, leaving the healthy side-stems in situ…
1 No. Horse Chestnut (T1) - Reduce in height and spread by 3-4m. Tree has been previously reduced to a finished height of 12m. This reduction aims to come in at approximate 1-2m…
1 No. Oak (T1) - Remove 1x low limb back to main stem. Reduce the remaining overhang into garden of number 13 Swanton Gardens by 2-3m from tips, back to suitable growth points. To…
Application for Discharge of Conditions: 8 (boundary treatments), 9 (landscaping), 10 (Landscape and Ecological Management Plan), 11 (cycle and refuse storage) and 17 (footpath…
1no. Oak (T3) Age Class M - To crown reduce by a maximum of 1.5m from branch tips, keeping crown at 12m height with a radial spread of 5m. Work is for Health and Safety reasons…